Motor oil has a serious impact on performance
characteristics and is a major attribute, defining its service
life. Use oils designed for four-stroke cycle vehicle engines,
since such oils contain cleaning additives, which comply or
even exceed SE standards according to API classification (or
equivalent).
RECOMMENDED OILS
9
0
0
C
10W-30, 10W-40
40
30
20
10
-10
-20
In general, the engine is recommended to run with motor oils of SAE10W-30, SAE10W-40 viscosity level. Motor oils
with other viscosity levels, may be used only if the average air temperature in your region does not exceed the limits
of the temperature range, specified in the table. Oil viscosity according to SAE standards or service category, are
specified on the API capacity sticker.
- If the generator is often working at high temperature or at high load, the oil should be replaced every 25 operating
hours.
- If the engine is often running in dusty or other harsh conditions, please clean the air filter every 10 hours.
- If you missed the maintenance time, perform it as soon as possible to save the generator engine.
Stop the engine before servicing. Place the generator on a flat surface and remove the spark plug cap
to prevent starting the engine. Do not run the engine in a poorly ventilated room or a closed room.
The working area should be well ventilated. Emission from the engine contain toxic
CO
2
, inhalation of
which can cause shock, loss of consciousness and even death.
ATTENTION - DANGER!
TECHNICAL MAINTENANCE WORKS
Node
Service type
Before starting
First month or
after 20
working hours
Each month or
after 20
working hours
Each 3 months or
after 50
working hrs
Each 6 months or
after 100
working hrs
Each year or after 300 working hrs
Motor oil
Checking
level
Changing
Air filter
Checking
Cleaning
Sparking
plug
Cleaning
Changing
Fuel tank
Checking
level
Cleaning
Fuel filter
Changing
www.ks-power.de/en
|
26