The Conversion between 3pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to
3PIN cable
General troubleshooting
Failure description
measure
Fail to start
Power fuse intact bulb
The normal lamp is not
controlled by the controller
Inspect DMX start address setting
Check XLR signal lines
Intermittent working
Inspect the dust and oil of the fans, whether the
dust plug fans and nets fans
Dim light, the brightness
decrease
Bulbs expiry
Check whether the optical system is clean
Beam impurities (halo)
Clean the dust and old of the light bulbs, lenses
and other components
Serious beam distortion
Check whether the lens is rupturing
Cleaning dust or oil
Noted: only professional persons can do as above
！
Page 10 of 13
Summary of Contents for KMLSP60W
Page 1: ...USER MANUAL KMLSP60W...
