21366 Distance Rod »Ring Lock«
- steel connecting rod for satellite systems
- load up to 35 kg
- technical information: expanding mandrel system ø 35-37 mm, total height: 950 - 1370 mm, weight: 2.4 kg
SAFETY NOTICES
ASSEMBLY INSTRUCTIONS
Install the distance rod in the subwoofer
1. First turn both ring locks of the expanding mandrel system towards OPEN to
1.
adjust the smallest diameter.
2. Place the expanding mandrel system in the mounting adapter of
2.
the subwoofer ensuring a tight fit.
3. Turn the lower ring lock to the right (direction CLOSE) until the splints fit
3.
tightly in the mounting adapter.
4. Place the satellite on the upper expanding mandrel system.
5. Now turn the upper ring lock to the left (direction CLOSE) until
5.
the splints also fit tightly here.
6. Affix safety rail (6.1) by completely inserting the upper pin through the holes of
6.
the adjustable rod. The safety rail must run on both sides of the clamp bracket.
6.
Placing clamping screws (6.3) through the loop of the cord (6.2) and
6.
screw it to the clamp bracket.
USER INFORMATION
TECHNICAL INFORMATION / SPECIFICATIONS
Material
tube - steel, powder coated, color black
screws, rail - steel, galvanized, nickel plated
ring lock - aluminum
mandrel elements - PA
Load
max. 35 kg
Dimensions
H: 950-1370 mm, Expanding mandrel system: ø 35-37 x 102 mm
Package
H x W x B: 1050 x 50 x 100 mm
Weight
2.4 kg
Accessories
(optional)
Adapter sleeve 21326: for speaker mounting adapter
with 38 mm diameter (= US-Variant)
Thank you very much for selecting this product. These instructions provide the information on all the important assembly and handling
steps required for assembly. We recommend that you store a copy of these instructions for future use.
INSPECTION, MAINTENANCE, CLEANING
- Maintenance is always to be performed when the system is not under strain.
- Check the functioning of the ring locks regularly.
- For cleaning purposes utilize a slightly damp cloth and a non-abrasive
-
cleaning solvent.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21366-000-55 Rev.03 03-80-136-00 12/08
- The load of 35 kg only applies in conjunction with a proper installation of subwoofer and satellite speakers, i.e.:
-
A. level and sustainable surface
-
B. The subwoofer must be heavier than the satellite
-
C. Satellite is to be secured against sideways impact.
- Ensure functioning speaker material, in particular the mounting adapter must be the correct size and quality.
- Safety rail (6) must be installed.
- Unchecked loosening of the clamping screws and the safety rail is not permitted.
Adjust the height
Hold the expandable rod (7) and loosen the clamping screw (6.3).
Subsequently pull the safety rail (6.1) out of the slot. Adjust the height of the rod
to the desired height, place it in the corresponding slit and let it set on the clamp.
Re-tighten clamping screw (6.3).
Adjust the direction of the speaker
Loosen the clamping screw (6.3), adjust the adjustable rod (7) such that the
satellite speaker points in the desired direction. Re-tighten the clamping screw.
