- without sieve bushing for concrete wall.
- with sieve bushing for perforated bricks.
Advantage: Mounts without the anchors expanding, as such the mount can
be used as often as needed and ensures mounting right up to the edge (not
under 100 mm distance). Please follow the assembly/mounting instructions
provided with the products.
4. WALL MOUNT
6. ABMESSUNGEN
- Place the mount in a vertical position and mark the drill holes
- Drill the anchor holes 4x (ø8 for the bolt anchor; ø10 for frame anchor)
5. MOUNT EXAMPLES
A. Concrete wall, e.g.: Bolt Anchor M8 x 75 mm
- drill hole
- blow out the hole
- hammer in the anchor
- Place the wall mount
- Place the U disk
- Tighten the nut
-
(SW13) with 20 Nm
B. Perforated brick, e.g.: Plastic frame anchors 10 x 100 mm
B.
with wood screws DIN571 ø7 x 105 mm
C. Suitable for both concrete and perforated brick:
C.
Injection molding anchor
- drill hole, blow out the drill hole
- hammer in the anchor
- Place wall mount
- and U-disks
- Screw in the screws (S13)
8. CHECK, MAINTENANCE, CLEANING
FAULT-FINDING (F) and REPAIR (R)
- When using the mount at "events and production sites for scenic
-
presentations" BGV C1 applies accordingly.
- In the event of workstation maintenance pay attention to possible risks
-
(wedging/pinching, if the product is hit, falling objects etc.) and secure
-
accordingly.
- To care for the product use a damp cloth and a non-abrasive cleaning agent.
F: Mounted parts are not stable
F:
R: Tighten the screws.
F: Loudspeaker sways back and forth on the locking pin
F:
R: Tighten the nut beneath the locking pin
4.1
F:
R: Check the loudspeaker, in particular, the internal diameter of the
F :R:
connector. This should be between 35 and 36 mm.
7. TECHNICAL DATA / SPECIFICATIONS
Material
Tubes, plates, bolts - Steel, black powdered
Screws, nuts - Steel, galvanized
Cover, caps - PA, PE
Load
max. 35 kg
Dimensions
H x W x D: 410 x 126 x 360 mm,
Locking pin: ø 35 x 84 mm
Box
H x W x D: 65 x 120 x 530 mm
Own weight
net: 2.6 kg / gross: 3.0 kg
Accessories
Adapter Sleeve 21326 for loudspeakers
with 38 mm internal diameter (US Variant)
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
24140-000-55 Rev.07 03-80-339.00 3/16
