14
INSTALLATION
After unpacking the product, check for any damage during transport. In case of problems, contact the dealer
or the After-Sales Service.
For built-in dimensions and installation instruction, see in below figures
The distance between the underside of the appliance and the separator panel must respect the
dimensions given in the figure (mini. 50mm).
In order to ensure the correct operation of the product, do not obstruct the
minimum required
clearance (min. 20 mm) on the worktop for air flow out.
If an undertop oven is installed, make sure the oven is equipped with a cooling system.
Do not install the hob above a dishwasher or washing-machine, so that the electronic circuits do not
come into contact with steam or moisture which could damage them.
