Installing the device
•
Place the device on a stable and level surface.
•
Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).
•
Do not block the ventilation slots of the device. This may overheat the device. Keep a Min.
distance of 10 cm to walls or other items.
•
Do not place hotplates next to open fires, heaters or other sources of heat.
•
Make sure that the mains connection cable is not damaged or squashed beneath the
device.
•
Make sure that the mains connection cable does not come into contact with sharp edges
and/or hot surfaces.
•
The device should be plugged on the suitable socket which is sufficient secured since the
full power is 3400W.
Commissioning the device
•
Prior to connecting the device, check whether the voltage indicated on the type plate
corresponds to the voltage supply in your home. A wrong connection may lead to grave
damage on the device and injury to persons.
•
The hotplate's surface consists of temperature-resistant ceramics. In case of damage, even if
this concern only a small tear, disconnect the device from the power supply immediately and
contact the customer service.
•
We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other
metal objects on the hotplate. These may heat up when the device is turned on.
•
Do not place any magnetically objects like credit cards, cassettes etc. on the glass
surface while the device is in operation.
•
On order to avoid overheating, do not place any aluminium foil or metal plates on the device.
•
Do not insert any objects like wires or tools into the ventilation slots. Attention: this may cause
electric shocks.
•
Do not touch the hot surface of the ceramic field. Please note: the hotplate does not heat up
itself during cooking, but the temperature of the cookware heats up the hotplate!
•
Do not heat up any unopened tins on the hotplate. A heated tin could explode; therefore
remove the lid under all circumstances beforehand.
Operating the device
Place suitable cookware onto the cooker plate, and connect the plug to suitable socket.
The operation of both zones is the same. The only difference is that the left heating zone have two
heating circles, you can choose the inner heating circle for a smaller pot or for lower power or the
whole bigger heating circle by pressing the heating zone selection button
.
Caution! Make no hot pots or pans on the keypad!
