26
5 IS THERE A PROBLEM WITH GAS HOB?
It may occur that the cooktop does not function or does not function properly. Before calling
customer service for assistance, let's see what can be done.
First of all, check to see that there are no interruptions in the gas and electrical supplies, and, in
particular, that the gas valves for the mains are open.
The burner does not light or the flame is not uniform around the burner.
Check to make sure that:
● The gas holes on the burner are not clogged;
● All of the movable parts that make up the burner are mounted correctly;
● There are no draughts around the cooking surface.
The flame does not stay lighted on the model with the safety device.
Check to make sure that:
● You press the knob all the way in;
● You keep the knob pressed in long enough to activate the safety device.
● The gas holes are not clogged in the area corresponding to the safety device.
The burner does not remain on when set to "Low".
Check to make sure that:
● The gas holes are not clogged.
● There are no draughts near tire cooking surface.
● Tile minimum has been adjusted correctly (see the section entitled, "Minimum Regulation").
The cookware is not stable.
Check to make sure that:
● The bottom of the cookware is perfectly flat.
● The cookware is centered correctly on the burner or electric hot plate.
● The support grids have not been inverted.
If, despite all of these checks, the cooktop does not function properly and problem persists, call
your supplier’s Customer Service Centre informing them of:
•
Tile type of problem.
•
The abbreviation used to identify the model (Mod.... )as indicated on tile warranty.
•
Never call upon technicians not authorized by the manufacturer, and refuse to accept
spare parts that are not original.
5.1 IS THERE A PROBLEM WITH CERAMIC BURNER (4Z-CG22)?
The cooking zones have become soiled.
This may be caused by burnt on remnants of food. This will not affect the working of the
appliance. However, you should make sure that the cleaning instructions are being followed
regularly.
The residual heat indicator cannot work.
If the cooking zone does appear to be hotter than 60
℃
and the residual heat indicator has not
come on, you should call the Service Department.
After checked all of these, the gas hob still does not work properly, please call the Customer
Service Center and inform them of:
--
Tile type of problem.
--
The gas hob model number (Model....) as indicated on the packing carton.
Never call the technicians who is not authorized by your supplier, and refuse to use the spare
parts which are not from manufacturer.
