User's Manual
K&F VIDA L Flying Frame
KLING & FREITAG GMBH © 2017
Version 1.6
Page 26 of 40
Depending on the ground condition, connecting the speakers may or may not be difficult. If
you experience problems, try selecting a different place for connecting the speakers.
After doing so and mounting the required number of flying frames, connect the uppermost
flying frame to the lift using a 3.25 t shackle.
1)
To connect the speakers, prepare
the end faces, then push the
horizontally arranged speakers
together. Afterwards, connect them
as described in the VIDA L user's
manual.
Mount the flying frame to the
speaker array.
2)
Make sure that all levers (a) have
returned to their horizontal captive
position.
For each speaker connection, make
sure that the chamfers of the
4 connecting pins (b) sit flush with
the housing surfaces of each upper
and lower speaker.
3)
Warning
Be sure to lift the speaker array
using a 3.25-t shackle only.
Using a 3.25 t shackle, mount the
lift to the VIDA flying frame load
adapter.
Caution
Pull back the rear case below
the speaker until the speaker
edge is located between the case
casters.
Carefully lift the speaker array.
