Boxi II – Manual
3. Installation & Maintenance
it reaches the
Max PWM
. The transition time from Start to max is marked as
Time To Max.
On figure 1 the Start PWM is 30%, the Max PWM is 100%.
Time
Key Press
PWM
Cycle
Time To Max
Figure 1:
Pwm mode switching description.
3
Installation & Maintenance
The device shall be installed away from:
Any heat source.
Radio, transponder, antennas and antenna cables.
When installing it in a location where it will be exposed to fluids or moisture,
it shall be installed in a waterproof enclosure.
3.1
Mounting Dimensions
The device is mounted using four screws type M4. It is highly recommended
that the device is mounted using rubber shocks (rubber washers), which reduce
the vibrations. Figure 2 illustrates mounting dimensions for the device.
3.2
Maintenance
No special maintenance is required.
10
©
Kanardia
2006-2021
Summary of Contents for Boxi II
Page 1: ...Boxi II Manual Kanardia d o o February 2022 Revision 2 1...
Page 2: ......
