BLU & Kanja — Manual
4.9
Engine Time Change
4.9
Engine Time Change
Sometime a change of engine total time is necessary on Indu RPM
instruments.
Kanja can be also used for this.
Please follow the
following procedure:
1. Connect “Blu” to the CAN network (or into the instrument).
Please make sure that CAN network is terminated. The termi-
nators are special terminators plugs, Daqu and Magu. At least
one terminator must be connected.
2. Start Kanja,
3. Connect it with “Blu” - a list of connected CAN devices ap-
pears.
4. From the list of devices, select the “RPM” device.
5. Press the “Tools” button on top right corner of the screen. A
list of options appears.
6. Select the “Engine Total Time” option.
7. Enter new engine total time.
8. The new engine time shall appear on the RPM.
9. Wait for about 10 seconds and then turn the power off.
10. Start it again and make sure that new time is correctly shown
in the display.
21
©
Kanardia
2020
