KAMWELD KAM-TC1000, Operation & Instruction Manual, Page: 16 / 22

16
+
End
b1
b2
C1
C2
F1
F2
P1
P2
End
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
SET
SET
SET
SET
SET
SET
SET
SET
SET
SET
saue
2
SET
80
SET SET
lock
3s
Figure 11. Flow chart of saving a
Program
.
6.2
Recall a
Program
.
WARNING: You current program will be overwritten by the selected
Program
. Please write it
down somewhere if it is important to you.
To recall a
Program
, press and hold SET key for 3 seconds until the Parameter Window
displays “LoCK”. Release the SET. The display will show “0”. Use “+” and “-” keys to adjust the
display to 1 and press SET. The display will show “rC” for a second and then the value “End”. If
press SET key now, you will exit this mode without overwriting any existing programs. This can
prevent your current program been accidently overwritten by a recalled program. Use “+” or “-”
key to locate
Program
you want to recall. If you press “+” key repeatedly,
you will see “End”, ”b1”, ”b2”, ”C1”, ”C2”, ”F1”, ”F2”, ”P1”, and ”P2” one by one. After you
locate the
Program
that you want to recall, press the SET key to select. Current program
will be overwritten by the selected program. Figure 12 shows the flow chart of how to recall a
Program
.