ULTRAFLOW® 54 (H)/(J)
Kamstrup A/S ∙ Technical Description ∙ 5512‐1554_J1_GB _04.2018
27
7.5.1.4
Mounting of angle fitting
The included angle fitting can easily be mounted on both sides of the electronics case as shown in
Figure 16
, and
if necessary, it can be removed again:
A
Adjust and join the corners of the angle fitting as indicated with their hitches (see detail) below the edge of
one side of the flow sensor’s electronics box. Note that both sides of the electronics box are in principle suitable
for mounting of the angle fitting. Although the type label is sufficiently robust, we recommend handling it carefully
when mounting the angle fitting on that side. The signal cable on the other side is flexible enough in order to be
guided between the side of the electronics box and the angle fitting.
B
Rotate the angle fitting around the edge towards the cover of the electronics box.
C
Press the angle fitting against the cover of the electronics box at the indicated positions and lock it. The
locking is acoustically indicated by a “Click”. Note that there is still a sufficiently large opening for sealing wires to
be guided between the angle fitting and the electronics box. In case one wants to remove the angle fitting again,
open the snap fit with your fingers and pull it back.
Figure 16. Mounting of the included angle fitting on ULTRAFLOW
®
54 (H):
(A) Adjustment, (B) Rotation and (C) Closing (Opening) of the angle fitting
7.5.2
MULTICAL
®
mounted on ULTRAFLOW
®
54 (J)
ULTRAFLOW
®
54 (J) can be rotated ±45° around the pipe axis in order to improve the readability of a MULTICAL
®
mounted directly on ULTRAFLOW
®
(see
Figure 17
(a)
). In some installations at ground level it can be of advantage
to mount MULTICAL
®
directly on top of ULTRAFLOW
®
54 (J) by means of angle fitting 3026-252 (see
Figure 17 (b)
).
The angle fitting 3026-252 is ordered separately.
(a) (b)
Figure 17. MULTICAL
®
603 mounted on ULTRAFLOW
®
54 (J). (a) The flow sensor can be rotated ±45° around the pipe
axis in order to improve the readability of the MULTICAL
®
display. (b) In some cases the angle fitting 3026-252 might
improve the readability of the MULTICAL
®
display.
C1
C2
A
B
Summary of Contents for ULTRAFLOW 54 Series
Page 2: ...ULTRAFLOW 54 H J 2 Kamstrup A S Technical Description 5512 1554_J1_GB_04 2018...
Page 6: ...ULTRAFLOW 54 H J 6 Kamstrup A S Technical Description 5512 1554_J1_GB_04 2018...
Page 91: ...ULTRAFLOW 54 H J Kamstrup A S Technical Description 5512 1554_J1_GB _04 2018 91...
Page 92: ...ULTRAFLOW 54 H J 92 Kamstrup A S Technical Description 5512 1554_J1_GB_04 2018...
