Kampmann Wall HK, Assembly, Installation And Operating Instructions

Page: 20 / 48

Wall HK
Assembly, installation and operating instructions
20
A
9
4.9
11.6
2.5
0.6
0.8
4.9*
B
5.6 5.6 D
4.9* C*
1.4*
9.1*
4.3*
0.6
0 0.3
0 0.8
14.7
5.5
A
8.9
4.9
2.4
2.5
0.6
0.8
4.9*
B
5.6 5.6 D
4.9* C*
1.4*
9.1*
4.1*
0.6
0 0.3
0 0.8
14.6
5.5
Front view
Top view
Keyhole detail
Side view
Fig. 5: Dimensions of basic unit and mounting points* [inch]
A [inch] B [inch] C [inch] D [inch]
32.1 20.9 22.3 20.9
43.3 32.1 33.5 32.1
63 51.8 53.2 51.8
74.8 63.6 65 63.6
Tab. 5: Table of dimensions [inch]
Note the Venkon minimum clearances when installing the basic units!
Highlight the dimensions and clearances of the key holes on the wall or ceiling as per the table, drill the holes and use
appropriate fixing materials to install the basic unit.
Align the basic unit for correct operation. Install the basic unit with a gradient on the condensation discharge side should
condensation be produced.
Once the basic unit has been aligned, prevent the fixing material from coming loose.