Venkon
Assembly, installation and operating instructions
31
*
2-pipe
4-pipe
Model
Models 61 − 63
Models 66 − 67
Models 61 − 63
Models 66 − 67
Coil
Heating/cooling
Heating/cooling
Heating
Cooling
Connection (Rp)
½“
¾“
½“
¾“
½“
Tab. 7: * Water connections
0.6
6
6
0.6
24.6
2.8
2.6
Fig. 16: Inspection opening
6.5.2 Sealing the pipework to the valve condensation tray
Proceed as follows when using the valve condensation tray to collect condensation from the valves:
Fig. 17: Insulation with wall-mounted units
Fit diffusion-tight insulation to the pipe from below through the opening of the
valve condensation tray to the top edge.
1
2
Fig. 18: Gluing rubber pipe collars with insula-
tion
1 Rubber pipe collar
2 Insulation
Press the rubber pipe collar
1
to the insulation
2
and the neck of the valve
condensation tray and glue in place.
Important:
There is a danger that condensation will escape if the insulation is
not leak-tight!
