Kampmann Tandem Series, Assembly, Installation And Operating Instructions, Page: 43 / 64

Tandem door air curtains
Door air curtains with patented Tandem technology
Assembly, installation and operating instructions
43
9 Operation
9.1 Operation of electromechanical control
Fig. 27: Speed controller type 30510
Speed controller type 30510
The speed controller is used to activate the fan and pre-set
the fan speed. Actuation of a thermoelectric shut-off valve is
not possible.
Fig. 28: Compact controller type 30158
Compact controller type 30158
Combination of operating mode selector switch and speed
sensor with options for external control and operation. The
required room temperature is set on the compact controller.
The door air curtain is disabled in standby mode. In winter
mode the fan speed can be set by the knob and the actuator
is open. In summer mode the fan speed can be set by the
knob and the actuator is closed. The fan can be allowed to
run on or increase the speed by connecting a door contact
switch and corresponding parametrisation. Additionally, a
room temperature control can be activated in winter mode
and when the speed controller is at position 0, which closes
the hot water valve and disables the fan when the set tem-
perature is reached.
Compact control in flat surface-mounted housing, white
Rating IP 30, voltage 230 V/50 Hz
Dimensions W x H x D: 110 x 110 x 27 mm