1
Flow connection 1/2”
2
Return connection 1/2”
3
Air vent
4
Thermostatic valve body 1/2” (accessory)
5
Thermostatic valve head (accessory)
6
Return shut-off valve 1/2” (accessory)
6
1.26
Wall Convectors
Wall models with PowerKon heat exchanger
Installation manual
4.2 Fitting Heat Exchanger/Water Connection
G
Place the convector in such a way on the brackets that the heat exchan-
ger pipe fits into the semi-circular recesses on the brackets.
G
Then connect up the heat exchanger, as shown in Fig. 5, to the flow
1
and return
2
connections. Use also the 1/2” valve connection set type
6
from the Kampmann accessories range.
G
Fit the air vent
3
to the flow connection. Take care to observe the
correct spacings here.
*Dimensions based on Kampmann convector
connection set type 126102 (optional accessory)
1
2
3
4
5
6
Fig. 5: Dimensions of valve connection
