3
1. Correct and Proper Use
Kampmann wall convectors are manufactured in accordance with the
state-of-the-art and recognised safety regulations. Personal danger or
damage to the equipment or other property can be caused if the
equipment is not installed, commissioned and used correctly and properly.
Wall convectors are solely intended for use indoors i.e. in residential
properties, offices, salesrooms etc. They should not be used in damp areas.
Any other use or any use, other than the aforementioned, will not be
deemed to be correct and proper. Any damage resulting from improper
use is the sole responsibility of the user/operator of the equipment.
Correct and proper use will also be deemed to include observance of all
information regarding safety, operation and maintenance/servicing
contained in this manual.
The installation of this product requires specialist knowledge in the field of
heating, cooling and ventilation. This knowledge is generally taught as part
of vocational training in the aforementioned fields and so is not described
separately here. Damage resulting from improper installation is the sole
responsibility of the operator.
2. Safety Information
Installation, assembly and maintenance of electrical equipment should only
be conducted by a qualified electrician (Association of German Electricians-
approved or similar). Wiring should comply with current Association of
German Electricians’ (VDE) guidelines and regulations set out by the
regional energy supply companies (EVU).
Non-observance of these guidelines and the operating manual can lead to
malfunctions with subsequent damage to the equipment and risk of
personal injury. Incorrect wiring can result in fatal injury owing to crossed
wires!
Prior to all wiring and maintenance work, all parts of the system have
to be made voltage-free and prevented from being reconnected
accidentally!
All people working on the equipment must have knowledge, gained in
their training, about the following:
- Safety and accident regulations and directives
- Guidelines and recognised technical regulations, e.g. Association of
German Electrical Engineering provisions
- DIN and EN standards
- Accident prevention directives e.g. VBG, VBG4, VBG9a
- DIN VDE 0100, DIN VDE 0105
- EN 60730 (Part 1)
- Technical regulations (so-called TABs) from regional energy providers
Wall Convectors
1.26
Wall models with PowerKon heat exchanger
Installation manual