16
.
1.96
2-Stage, Three-Phase Controller
With Timing Switch and Room Temperature Controller, Type 30277
Operating instructions
4.7 Pre-set programs
Programs P01-03
The switching on and off times for programs P01 to P03 are preset (pre).
The user can change these programs.
Individual program, P--
Under the menu option P-- you have the option of creating a user-defined
program. This program can be changed at any time. There are up to 20
memory locations available for 10 OFF and 10 ON commands. You can
allocate a corresponding weekday or week block to each memory
location.
Selecting pre-set programs:
Sequence to follow after setting time in the Reset mode.:
G
Select a pre-set program.
Once selected the program desired there are following options:
Menu:
terminate programming
OK:
Call up pre-set programs using OK either to change the selection (any
program ON or OFF can be modified by using ''+'' or ''-'' keys and
confirming with OK) or accept it using OK. This also allows you to
move to the next available memory field to add new programs (see
the following page).
after selecting P02 you should also program:
Sa-Su 22:30 ON (prog05)
23:00 OFF (prog06)
.
1.96
2-Stage, Three-Phase Controller
With Timing Switch and Room Temperature Controller, Type 30277
Summary of Contents for 30277
Page 24: ......
