background image

Symbols:

Caution! Danger!

Non-observance of this
information may cause
serious damage to 
persons or property.

Danger of
electrocution!

Non-observance of this
information may cause
serious damage to 
persons or property by
electric current.

Important

Important note!
Nonobservance of this
information cannot 
guarantee the correct
operation of this/these
unit(s).

Read this manual
through carefully 
before commencement
of installation!

All persons involved 
in the installation, 
commissioning and use of
this product are duty
bound to pass this 
manual onto subsequent
tradespersons and then
to the end user or 
operator. Retain this
manual until the 
system is ultimately 
decommissioned!

1. Important information

1.1

Correct and proper use  . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

1.2

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

2. Operation

2.1

System diagram - unit heater   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

5

2.2

Switching devices that can be actuated   . . . . . . . . . . . . . . . . . . . . . .   

6

3. Installation

3.1

Installing the timer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

7

3.2

Installing the room sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

7

3.3

Setting the switching differential  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  

7

3.4

Calibrating the sensor  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3.5

Electrical wiring  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

3.6

Technical data   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

4. Operation

4.1

Programming . . . . . . . . . . . . . . . . . . . . . . . . . .

9-10

Amendments to the content of this manual may take place without
prior notice being given!

1.96

Timer

with electronic room temperature control and room temperature sensor type 30076 

Assembly and installation instructions

Summary of Contents for 30076













Reviews: