Kampa Glow 1, Operating Manual

Page: 10 / 96

10 4445103345
Storing the parabolic heater
!
1. Disconnect the heater from the gas container
(see chapter “Disconnecting the parabolic
heater from the gas container” on page 9).
2. Store the appliance and the gas container in a
cool, dry and well ventilated area free from
direct sunlight, heat and ignition sources.
Troubleshooting
Warranty
The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
kampaoutdoors.com/store-locator) or your
retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchase date
• A reason for the claim or description of the fault
Disposal
➤
Place the packaging material in the appropriate
recycling waste bins, wherever possible.
M
If you wish to finally dispose of the product,
ask your local recycling center or specialist
dealer for details about how to do this in
accordance with the applicable disposal
regulations.
Technical data
WARNING! Explosion hazard
Do not store or transport the heater while
it is still connected to a gas container.
Fault Solution
The heater fails to light. Contact your dealer or an
authorized repair center.
The heating perfor-
mance decreases.
Glow1 Glow2
Rated heat input: 0.7 kW 1.4 kW
Gas category: Direct pressure butane/propane mix-
ture
Direct pressure butane
Allowed gas containers: Gas cartridges with 7/16-28 screw
thread connector complying with
EN 417
Butane gas cylinders with a M16 x 1.5D
screw thread connector complying
with EN 12542
Injector size: ø 0.18 mm ø 0.22 mm
Dimensions (W x H x D): 161 x 127 x 172 mm 216 x 120 x 232 mm
Weight: 0.18 kg 0.44 kg
Conformity: