Kampa Blast Pump, Operating Manual

Page: 5 / 60

4445103587 5
• Do not place the device near naked flames or
other heat sources (heaters, direct sunlight, gas
ovens etc.).
• Do not let the device operate unattended.
• Never pull the plug out of the socket by the
cable.
• The device shall not to be exposed to rain.
Scope of delivery
Intended use
The pump is intended to be used for inflatables
such as awning tents and tents.
The Twister pump is designed to be operated from
a DC power supply socket of a vehicle or an AC
power supply socket.
The Blast pump is designed to be operated from a
DC power supply socket.
This product is only suitable for the intended pur-
pose and application in accordance with these
instructions.
This manual provides information that is necessary
for proper installation and/or operation of the
product. Poor installation and/or improper operat-
ing or maintenance will result in unsatisfactory per-
formance and a possible failure.
The manufacturer accepts no liability for any injury
or damage to the product resulting from:
• Incorrect assembly or connection, including
excess voltage
• Incorrect maintenance or use of spare parts
other than original spare parts provided by the
manufacturer
• Alterations to the product without express per-
mission from the manufacturer
• Use for purposes other than those described in
this manual
Kampa reserves the right to change product
appearance and product specifications.
Using the electric air pump
A
➤
For inflation, proceed as shown (fig.
2
,
page 3).
➤
For deflation, proceed as shown (fig.
3
,
page 3).
Cleaning and maintenance
A
➤
Occasionally clean the product with a damp
cloth.
➤
When storing the device, ensure the supply
cord and air hose are not trapped or kinked.
Pos. in
fig.
1
,
page 3
Component Quantity
1 Pump 1
2 Separate DC power cord
(Twister pump only) 1
3 Separate AC power cord
(Twister pump only) 1
4 Nozzle adapter 3
NOTICE! Risk of overheating
• Make sure that the pump is sufficiently
ventilated during operation.
• Do not operate the pump continuously
for longer than 25 minutes as the
motor may overheat.
Allow the pump to cool down for
30 minutes after 25 minutes of contin-
uous use.
NOTICE! Damage hazard
• Do not attempt to put any object into
the inflation port as these can damage
the internal pump mechanism.
• Do not use sharp or hard objects or
cleaning agents for cleaning as these
may damage the product.
KampaBlastPump-TwisterPump_OPM_4445103587_EMEA16_202x-xx-xx.book Seite 5 Dienstag, 7. Dezember 2021 10:59 10