6
Working mode setting—Flow Mode
Fully automatic cycle mode setting
1. In the flow mode, long press the encoder to switch to the operating flow setting.
The nixie tube displays all numbers and flickers. At this time, it is to set the
operating flow of the pump;
2. The rotary encoder can set the Operating flow, and the setting range is 0 ~ 9999 ml.
3. Press the encoder (not long press) to switch to the pump stop time setting, and
the first position of the digital tube will jump (red in the picture);
4. The rotary encoder can set the time, and the settable time range is 0 to 999
seconds;
5. Press and hold the encoder to return to the flow rate display interface, and the
running flow and stop time will be saved automatically;
6. Press the encoder (not long press), the pump will run according to the set
Operating flow and stop time;
7. Press the encoder (not long press) and the pump stops cycling. The digital tube
switches to the display flow rate interface.
Semi-automatic cycle mode setting
Simply set the time to 0 in step 4 of the fully automatic cycle mode setting mode. At
this time, after the pump stops running according to the set Operating flow, it will
not start automatically; if it starts again, the user needs to press the encoder or step
on foot switch.
Manual mode setting
1. Set the Operating flow to 0 in step 2 of the automatic cycle mode setting;
2. Set the time to 0 in step 4 of the automatic cycle mode setting;
At this point, the start and stop of the pump is controlled by the encoder or the foot
switch.
