Kammok Crosswing User Manual Download Page 3

Using additional clamping plate, 4 carriage bolts, and 4 nylon lock 
nuts, clamp the Angle Adjust Bracket to crossbar. Repeat for other 
crossbar. 

TOOL: 13 mm Crescent or Socket Wrench

Attach one clamping plate to each Angle Adjust Bracket using two 
flat head bolts and 2 nylon lock nuts.

TOOLS: 13 mm Crescent or socket wrench. 5 mm Hex wrench

Trim rubber pad at indents. Apply adhesive backed rubber pad to 
bottom of each Angle Adjust Bracket.

Apply adhesive backed rubber pad to each clamping plate.

� Check that all awning fasteners are tightened and awning is securely 

attached to vehicle before driving.

� Ensure awning is properly closed and secure with pronto latch locked and 

safety straps snapped in before driving vehicle.

� Pinch hazard! Keep body parts clear of moving parts during opening and 

closing of awning.

Crosswing Setup Instructions

Page 3

1

1

T-Slotted Roof Racks

Cross Bars without T-Slots

Attach one Angle Adjust Bracket to each crossbar using two T-slot 
nuts and two ⅝” bolts. Place at even positions on the bars. 

TOOL: 6 mm Hex wrench

2

3

2

x 2

� Stow awning in high winds (above 25 mph) or heavy snow.

� Do not allow awning to self retract uncontrolled.

� Awning contains a high tension spring system, do not alter the spring system.

� Do not attempt to adjust tension without following provided instructions.

� Do not pull down on or hang from the awning.

� Do not hang any non-Kammok approved items from awning. 

WARNING:

Summary of Contents for Crosswing













Reviews: