80
not overload cutting, it will protect pruning shear and battery is not damaged. Do not cutting over
the dimension specified in the technical information table.
•
User just loose trigger when the blade has been jammed by branch, the blade will resume maximum
position.
Caution
: Do not sway the pruner from the left to right in order not to damage the edge of
blade during the resume process of blade.
Check the working frequency of the blade to verify the good working condition.
14
Cutting instructions
Wear suitable work clothes such as boots with non-slip soles, sturdy long trousers, gloves and goggles.
Wear protection gloves
Wear eye protection
Risk of cutting and severe injuries
Warning!
In particular situations of very hard use, the blade and the handle could reach high temperatures. It is
recommended to handle the pruner with care, using protective gloves.
•
When ready to cut, place the blade on the branch to be cut and press the trigger:
•
When operating the tool, keep the other hand and any other part of your body at a minimum distance
of 15cm from the blade:
•
Keep all other people at a minimum distance of 1.5m
•
Blade will be hurt or jammed if cutting bigger branch
forcedly.
•
Do not move the tool during the pruning shear cutting, it can cause danger.
•
Do not use the device in rain or humidity environment.
•
If the pruners stop working during long term use and you hear 4 fast beeps, this is an indication of
undervoltage protection which means the battery is depleted. Please charge as soon as possible.
•
Switch off the device after use and remove the battery from the pruner.
•
If no operation for 10 minutes, the pruner switches off automatically.