78
1
Capacity
2.5 Ah
2
Rated Voltage
21.6V
3
Maximum Voltage
25.2V
4
Operating Hours
3600 cuts *
5
Weight (battery)
0.36kg
Charger
1
Input Voltage
100-240V AC ,50-60Hz
2
Output Voltage
DC25.2V
3
Recharging Current
1.4A
4
Protection Level
Ⅱ
5
Charging Time
3-5h
* 3600 cuts/per battery charge
–
Cutting Ø = 15
–
20 mm
10
Charging the Battery
Do not dispose battery under high temperature or vibration environment to avoid liquid
leakage from the battery.
D
isconnect the battery from tool before charging.
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before first time using.
•
The battery is not fully charged when you buy, you must charge 3-4 hours before using first time.
•
Before recharging the battery, check the remaining charge on the display.
•
Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
•
Keep safety rules and environment protection information in mind all the time.
10.1
Battery charging procedure.
• Recharge in a closed environment, at a temperature b 1
0 ° C and 22 ° C.
• The three
-way battery charger allows you to recharge all three supplied batteries at the same time.
• Make sure the characteristics of the charger and the battery are aligned before starting to charge.
• The red LED light on the charger
indicates that the battery is charging, the green LED light indicates
that it is fully charged. The approximate charging time is 3 to 5 hours (charging time for 3 fully
discharged batteries at the same time), do not keep the batteries connected longer than necessary, as
they may damage them.
• The charger has three out puts, it can charge up to 3 batteries at the same time. The charging time is