14. HOLDER
Method of use
◆
Insert the memory card
1. According to the instructions carefully insert the card into the card slot. Errors or rough insert
memory card may lead to memory card or the card slot is broken.
2. Insert the memory card will be saved as image recording.
3. If the device does not recognize the card, please take out the insert to try again. If you still
can't identify, may be the card is damaged
Card or device does not support this type of memory card. Please try to replace another
memory card.
4. Please pay attention to often change the memory card and copy content to other storage
medium. Don't have burn on the video card
Program or run other executable file, it could erase the above data.
◆
The start up and shut down of equipment
Use the built-in battery, or connect car-mounted charger can boot device or connected to
computers.
Note: when using the built-in power supply vehicle traveling data recorder, when low battery
tips in low electricity, save the video before the automatic shutdown.
◆
Reset
When the machine is caused by improper operation, abnormal situation, can press reset button
again after boot, this machine can be back to normal.
◆
Switch work mode
This machine has three work modes: Video ,Photo and Playback. Press MODE key to switch.
Video
：
Video mode icon
Video segmentation time Exposure compensation
Gravity induction video
Resolution
Wide dynamic range recording icon
