background image

USING YOUR KAMBROOK 
PIZZA OVEN

Before first use remove and safely discard any 
packaging material and promotional labels. Ensure 
the appliance is switched off at the power outlet 
and the power cord is unplugged.

Remove the pizza stone from the Pizza Oven and 
wipe with a soft, damp cloth and dry thoroughly. 
Wipe the interior surfaces of the Pizza Oven with 
a soft, damp cloth. Dry thoroughly. Reinsert the 
pizza stone ensuring it is correctly positioned on 
the center drive system and it is level and flush 
with the outer housing of the appliance. Close 
the lid.  

The Pizza Oven is now ready to use.

The Pizza Oven has three heat settings:

Setting 1

 is a low heat setting and can be used 

to keep cooked pizzas warm.

Setting 2

 is recommended for cooking pizzas 

using pre-cooked pizza bases, pita breads, tortillas 
or English muffins.

Setting 3

 is a higher heat setting giving pizzas a 

crisper crust. It is recommended for frozen pizzas, 
pizzas prepared with fresh pizza dough (including 
the recipes in this book) and pizzas with thick 
toppings.

Ensure the temperature control dial is set 

to LOW and the timer dial is set to 0. Insert 

the power plug into a 230/240V power 

outlet and switch on.

For best cooking results preheat the Pizza 

Oven before use. To do this, turn the 

temperature control to the desired heat 

setting and turn the timer dial to 15 minutes. 

Allow the Pizza Oven to heat up until the 

preset time has elapsed and the bell sounds.

NOTE: When setting the timer dial for a short time 
(less then 30 minutes) turn it clockwise past the 
desired time, then anticlockwise back to the correct 
position. For example, to bake for 20 minutes – turn 
timer dial to 25 minutes, then back to 20 minutes 
position.  

NOTE: The heating light will illuminate when the 
Pizza Oven is preheating and cooking. The heating 
light may turn on and off during operation. This is 
the automatic thermostat light indicating that the 
correct temperature is being maintained.

1.

2.

NOTE: When switched on for the first time, the 
Pizza Oven may give of vapours for a short period 
of time. This is due to the oil residue that may have 
been used in the manufacturing process. This is not 
detrimental to the performance of the Pizza Oven 
and will dissipate with use.

Ensure the timer dial is set to 0. Carefully 

open the lid using the cool touch handle.  

Do not touch surfaces of the Pizza Oven 

without wearing oven gloves. Do not lean or 

stand over the Pizza Oven when opening the 

lid as steam may be released.

NOTE:  If cooking pre-purchased pizza, ensure that 
all packaging materials are removed before cooking.  
Some pre-purchased pizzas are packed on a sheet 
of paper or polystyrene which may stick to the base 
of the pizza or to the pizza stone.

TIP: If making homemade pizza, you can prepare 
the base and toppings while waiting for the pizza 
oven to pre-heat. 

Place prepared pizza onto the pizza stone. 

If making a large homemade pizza it will 

be necessary to assemble the pizza on the 

pizza stone. Roll the dough into shape, 

ensuring pizza base is not larger then 30cm 

in diameter. Place the base onto the pizza 

stone. Working quickly and being careful not 

to touch the stone, add toppings to the pizza 

base.

Carefully close the lid using the cool touch 

handle or wearing oven gloves.

Set the timer to the desired cooking time.  

The following times should be used as a 

guide only to allow for individual tastes and 

preferences. The time may vary due to the 

size, shape and thickness of the pizza. As you 

become familiar with the Pizza Oven, adjust 

cooking times accordingly. It is recommended 

to use setting 3 on the temperature control 

dial when following the times below. 

NOTE: Ensure that pizzas are less than 30cm in 
diameter. Also ensure pizza toppings are well below 
the element area inside the lid, to avoid over-
browning or burning.

3.

4.

5.

6.

To protect against electric shock do not immerse 
the Pizza Oven, cord or power plug in water or 
any other liquid.

This appliance has a safety glass window. The glass 
is stronger than ordinary glass and more resistant 
to breakage. The glass can break, but the pieces 
will not have sharp edges. Avoid scratching door 
surface or nicking the edges.

Keep the Pizza Oven clean. Follow the cleaning 
instructions provided in this book (page 7).

IMPORTANT SAfEGURARDS fOR ALL 
ELECTRICAL APPLIANCES

Unwind the power cord fully before use.

Do not let the power cord hang over the edge of 
a table or counter, touch hot surfaces or become 
knotted.

This appliance is not intended for use by persons 
(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience 
and knowledge, unless they have been given 
supervision or instruction concerning use of the 
appliance by a person responsible for their safety.

Children should be supervised to ensure that 
they do not play with the appliance.

It is recommended to regularly inspect the 
appliance. Do not use the appliance if power 
supply cord, plug or appliance becomes damaged 
in any way. Return the entire appliance to the 
nearest authorised Kambrook Service Centre for 
examination and/or repair.

Any maintenance, other than cleaning, should be 
performed at an authorised Kambrook Service 
Centre.

This appliance is for household use only. Do not 
use this appliance for anything other than its 
intended use. Do not use in moving vehicles or 
boats. Do not use outdoors.

This appliance is not intended to be operated by 
means of an external timer or seperate remote 
control system.

The installation of a residual current device 
(safety switch) is recommended to provide 
additional safety protection when using electrical 
appliances. It is advisable that a safety switch with 
a rated residual operating current not exceeding 

30mA be installed in the electrical circuit 
supplying the appliance. See your electrician for 
professional advice.

 

CAUTION: fULLY UNWIND 

CORD BEfORE USE. DO NOT ALLOW 

CORD TO COME IN CONTACT 

WITH HOT STONE PLATE. DO NOT 

REMOVE STONE PLATE UNTIL IT IS 

COMPLETELY COOLED DOWN.

THE OUTER SURfACE Of THE PIZZA 

OVEN BECOMES VERY HOT WHEN 

OPERATING AT HIGH TEMPERATURES. 

ALWAYS WEAR INSULATED OVEN 

GLOVES WHEN INSERTING, REMOVING 

OR HANDLING ITEMS fROM THE PIZZA 

OVEN WHEN HOT.

KPZ100_V3.indd   4-5

15/5/08   2:26:21 PM

Summary of Contents for Rotating Stone KPZ100








Reviews: