Kambrook KFA839, Nstructions Booklet

Page: 12 / 16

12
NOTE:
When the NATURE
mode setting is selected, the
tower fan is programmed to
self-regulate through the various
fan speeds. The NATURE
mode is independent from the
fan speed settings while the LED
screen will still display the last
selected fan speed setting.
NOTE: The tower fan is fitted with
a power saving feature. When
any one of the 3 mode types are
selected or the TIMER function
is set, the LED display panel will
automatically dim out after 30
seconds, only displaying the
temperature dimly on the screen.
Press any button to turn the
display on again.
Setting the Oscillation
This function will work in any mode.
Pressing the ‘OSC’ button will allow
the tower fan to oscillate from side to
side. To stop the unit oscillating, press
the ‘OSC’ button once more.
Setting the Auto-Off Timer
The timer function works in all
operating modes, and switches
the unit into standby mode after a
pre-set number of hours.
• Press the ‘TIMER’ button to
activate the timer settings.
• Press the ‘TIMER’ button to cycle
through the one hour increments,
up to 12 hours.
• The tower fan will then switch itself
to standby mode after the selected
number of hours has passed.
• The TIMER can be set on any of
the settings.
Using the Remote Control
Before using the remote control,
remove the battery isolating slip
by pulling the slip away from the
remote control. The remote control
buttons operate in the same way
as those on the tower fan control
panel. Your remote control includes
1 x CR2025 3V Lithium battery, and
can be conveniently stored in the
compartment on the top of the
tower fan or at the rear housing
of the unit.