background image

4

Kambrook Recommends Safety First

IMPORTANT: Please retain your 

instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any 

consumer product, so that you, our valued customer can confidently 

use and trust our products. We ask that any electrical appliance that 

you use be operated in a sensible fashion with due care and attention 

placed on the following important operating instructions.

Important Safeguards For Your Kambrook  

Ceramic Tower Heater 

• 

Carefully read all instructions before operating 

the Tower Heater and save for future reference. 

• 

Remove any packaging material and 

promotional stickers before using the heater 

for the first time. 

• 

Connect only to a 230V or 240V power outlet. 

• 

Avoid touching heater body while it is on, 

some parts of the heater are hot. When 

moving the unit switch OFF and hold the 

heater by the handles where provided.

• 

Keep combustible materials such as drapes 

and other furnishings at least 1.7 meters from 

the front, sides and rear of the heater.

• 

Extreme caution and supervision is necessary 

when this heater is used by or near children, 

invalids or animals. 

• 

Children should be supervised to ensure  

that they do not play with the heater.

• 

Do not leave the heater unattended while 

in use. Always switch OFF the heater at the 

controls and at the power outlet, then unplug 

heater from the power outlet when not in use. 

• 

Do not operate heater whilst asleep.

• 

Do not operate any heater with a damaged 

cord or plug, or if heater has been dropped 

or damaged in any manner. Return heater 

to your nearest Kambrook service centre 

for examination, electrical or mechanical 

adjustment or repair. 

• 

Do not operate the heater with the power 

cord damaged, frayed or split, wound around 

any part of the heater, or in contact with 

heated surfaces of the heater.

• 

Do not run the cord under the carpeting or 

cover the cord with rugs, runners or the like. 

Arrange cord away from traffic areas and 

where it will not be tripped over.

• 

Do not locate the heater immediately below 

and in front of a socket outlet when in use. 

• 

Do not use this heater with a programmer, 

timer or any other device that switches  

the heater on automatically since a fire  

risk may exist if the heater is covered or  

positioned incorrectly.

• 

This heater is not intended for use in wet or 

moist locations. Do not use this heater in the 

immediate surrounding of a bath, a shower  

or a swimming pool. Do not immerse or allow 

liquids to be spilt on heater. 

• 

Do not use the heater to dry your laundry. 

• 

This heater has hot and arcing or sparking 

parts inside. Do not use in areas where 

petrol, paints, aerosols, or other inflammable 

substances are used or stored.

• 

Do not allow materials that have been in 

contact with oil, petroleum based products  

or drying fluids to come in contact with  

the heater.

• 

To disconnect heater switch the power On/

Off switch to OFF, then switch off at the power 

outlet then remove plug from the outlet.

• 

Do not insert or allow foreign objects to pass 

through the inlet or outlet openings. This may 

cause an electric shock, fire or damage  

the heater. 

Summary of Contents for KCE240

















Reviews: