background image

5

• Children should be supervised to 

ensure that they don’t play with  

the appliance.

• Regularly inspect the supply cord, 

plug and actual appliance for any 

damage. If damage is found in 

any way, immediately cease use 

of the appliance and return the 

entire appliance to your nearest 

authorised Kambrook service centre 

for examination, replacement  

or repair.

• The installation of a residual 

current device (safety switch) 

is recommended to provide 

additional safety protection when 

using electrical appliances. It is 

advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See you electrician for 

professional advice.

Important Safeguards For All  

Electrical Appliances

• Fully unwind the power cord  

before use.

• Do not let the power cord hang over 

the edge of a bench or table, touch 

hot surfaces or become knotted. 

• The appliance is not intended for 

use by persons (including children) 

with reduced physical, sensory 

or mental capabilities, or lack of 

experience and knowledge, unless 

they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible 

for their safety.

• Children should be supervised to 

ensure that they do not play with 

the appliance.

• It is recommended to regularly 

inspect the appliance. To avoid a 

hazard do not use the appliance 

if power cord, power plug or 

appliance becomes damaged 

in any way. Return the entire 

appliance to the nearest authorised 

Kambrook Service Centre for 

examination and/or repair. 

• Any maintenance other than 

cleaning should be performed  

at an authorised Kambrook  

Service Centre.

• This appliance is for household use 

only. Do not use this appliance for 

anything other than its intended 

use. Do not use in moving vehicles 

or boats. Do not use outdoors. 

Misuse may cause injury.

• The installation of a residual 

current device (safety switch) 

is recommended to provide 

additional safety protection when 

using electrical appliances. It is 

advisable that a safety switch with 

a rated residual operating current 

not exceeding 30mA be installed in 

the electrical circuit supplying the 

appliance. See your electrician for 

professional advice.

Summary of Contents for KBV420

















Reviews: