11
10
5.
Plug the power cord into a 230V
or 240V power outlet and switch
on at the power point.
6.
With one hand on the motor base
and the other hand holding the
assembled cup, place the cup
inside the motor base by aligning
the three tabs on the cup with the
three slots on the motor base
(See Fig. 5).
Fig. 5
7.
To blend, press down and turn the
assembled cup clockwise in the
direction of the “ON” symbol on
the motor base. The cup will lock
inside the motor base and the
blender will operate (See Fig. 6).
Fig. 6
NOTE:
The BlitzPro Blender will
not operate unless the three
locking tabs on the cup are
properly fitted into the three
slots on the motor base.
WARNING:
Do not
operate the motor
continuously for more
than 30 seconds at a
time. Allow the motor
to rest for 2 minutes
before continuing.
8.
When blending is complete, hold
the motor base with one hand
and with the other hand turn the
assembled cup anti-clockwise
in the direction of the ‘OFF’
symbol on the motor base. Lift the
assembled cup upwards from the
motor base to remove.
9.
Flip the cup so the blade holder is
at the top (See Fig. 7).
Fig. 7
10.
Carefully unscrew and remove
the blending blade holder from
the cup by turning the blade
holder in an anti-clockwise
direction. Avoid touching the
sharp blades.
11.
After use, ensure the motor base
is switched off at the power outlet
and remove the power cord.
Allow the motor base to cool
before cleaning and storing.
Using Sports Bottles and
Reusable Lids After Blending
1.
Pour the blended drink into the
600ml sports bottle. Screw the
drinking lid onto the plastic bottle
and your drink is now ready to
take away.
2.
To keep the cap open while
drinking, press cap all the
way back and past the tab
(See Fig. 8).
Fig. 8
NOTE:
The sports bottles do not
fit to the BlitzPro motor base for
blending. Pour blended content
from the BlitzPro blending cups
into the sports bottles to take on
the go.
NOTE:
Use blended ingredients
immediately or attach the
reusable lid to store in the
refrigerator for later use.
Assembling and Using the
Grinding Blade
Use the grinding blade with the cups
to grind dry ingredients, such as
almonds, coriander seeds and fresh
coffee beans.
1.
Place the motor base on a flat,
dry surface. Ensure that the
blender is switched off at the
power outlet and the power cord
is unplugged.
2.
Put the ingredients to be grinded
inside the 350ml cup.
NOTE:
For best results Kambrook
recommends using the 350ml
sized cup for grinding.
Using Your Kambrook Blender
continued
