Kambrook KAM-KFA839GRY, Nstructions Booklet

Page: 9 / 16

9
4. Position base stand piece (b) with
the curved side facing towards
the bottom part of the tower fan
body, onto base stand piece (a)
by interlocking the four locating
posts located along the straight
edge of each of the base stand
pieces and by aligning the two
remaining screw posts located
underneath the tower fan body
with the corresponding screw
posts on base stand piece (b).
Firmly push down base stand
piece (b) until it is secured into
place with base stand piece (a).
(See Fig. 4). Secure base stand
piece (b) with the 2 remaining
fastening screws. (See Fig. 5).
Fig. 4
Fig. 5
5. Thread the power cord through
the circle cord opening located
in the base stand piece, pressing
into the cord clip to keep it
secure. (See Fig. 6).
Fig. 6
6. Return the tower fan to its upright
position; it is now ready for use.
WARNING: Do not operate
the tower fan without the
base stand fitted.
a
b
Using Your Kambrook Tower Fan
continued
a
b
WARNING: Make sure the
power cord is not trapped
between the base stand
pieces and tower fan body.