7
Operating Your Kambrook Vacuum Cleaner
Before First Use
Remove all packaging from the unit,
hose and other accessories; ensure
that you have removed all of the
accessories before discarding the
packaging.
Ensure that the dust bag and filters
are correctly fitted.
Locate the crush proof hose and push
the connection point into the hose
inlet connection on the top of the
vacuum, until a “CLICK” sound
is heard.
Connect the wide end of the metal
wand to the hose end and push
together firmly.
Fit the floor tool to the narrow end of
the wand and push together firmly.
Fully extend the power cord by pulling
the power plug (situated at the rear
of the unit) out from the unit, until the
yellow tape on the cord is shown.
IMPORTANT:
Ensure
that you do not over
extend the power cord,
do not extend past the
red warning tape on
the cord.
Plug into a 230V or 240V power point
and switch on.
To commence vacuuming, push
down on the ‘ON/OFF’ button , at
the top, rear of the unit.
When vacuuming is complete, push
down on the ‘ON/OFF’ button to
switch OFF. Turn the power off at the
outlet and then remove the power
cord from the power outlet (when
removing plug from the power outlet
grasp the plug not the cord).
To retract the cord push down on the
‘CORD REWIND’ button .
IMPORTANT:
Hold the
plug end when retracting
the cord to prevent it
from striking you or the
vacuum.
WARNING:
Always ensure
that the dust bag and
the motor protection filter
are correctly fitted. Never
operate without the dust
bag and filters in place.
Variable Power Control
The variable power control slide
switch is located on the top of the
vacuum cleaner. Slide the control
to ‘MAX’ for maximum power for
vacuuming hard floor and carpet
surfaces. Slide the control ‘MIN’ for
minimum power level when using the
crevice, upholstery and brush tools.
Crevice, Brush and
Upholstery Tool Accessories
The crevice tool is ideal for
vacuuming hard to reach places such
as the edges along skirting boards.
The brush and upholstery tool can be
used to vacuum delicate surfaces
and areas such as shelves and
venetian blinds.
Set the variable speed control
between minimum and medium
power when using the tool accessories.
Turn off the vacuum cleaner when
changing any attachments.
