User Manual
KK-105 CH
23
4. Cycling of steps
•
Choose how many times should the selected program sequences to be repeated.
5. Cycle from step
6. Cycle to step
•
With these two settings you select the program sequence that will be repeated.
For example:
you have “number of steps” set to 4, and you would like to repeat/cycle all steps
from 1 to 4. In this case you have to set the “cycle from step” to 4, and “cycle to step” to 1. This
way when the program is finished with step no. 4 it returns to step no. 1 and repeats the
process. The process will be repeated for so many times as you have set in the “cycling of step”
setting.
When you are using cycling options the main display will show:
Meaning:
S: 2
this number will indicate which step
(“number of steps” setting) of the
program is currently under execution.
7/20
20
–
number off all steps that need to be executed, 7
–
current step in
process.
Example:
“number of steps” is set to 5, cycling of steps is set to 3, “cycle from step” is 5, “cycle
to step” is set to 1. So the program shall do 5 steps and then repeat them for 3 times
(5 + 3 x 5 = 20). together we have 20 steps to execute. Currently is in step 7.
30:00
Countdown timer for the current step (step “duration time” setting).
Tc=38.3°C / 40°C
Current chamber temperature is 38.3°C, set chamber temp. 40°C
Rh= 62.2% / 75 %
Current chamber humidity is 62.2%, set humidity is 75 %.
Tw =
29.8°C / 34.7°C
Current water temperature in water pool 29.8°C, calculated value for
water temperature for Rh=75% at 40°C is 34.7°C
7.Recording period:
•
Here you can set the printing interval for printer. You can set the interval from 1 min to
200 min.
If printer is not connected to the machine printing should be switched off = 0 min!
To change value press .
ATTENTION:
“Cycling from step”
number must always be bigger than “
Cycling to step”
number!
S: 2, 7/20 30:00
Tc= 38.3°C / 40°C
Rh = 62.2 % / 75%
Tw = 29.8°C / 34.7°C
