www.kamansensors.com
PART NO: 860512-001
Last Revised: 11/26/2014
4
Part 2 - Connecting the KD-2306
CAUTION
:
Maximum terminal screw torque is 0.8 N-m (7.0 inch-pounds).
The sensor is always connected to the twin BNC connector on the front panel. All other input,
output, and synchronization connections to the KD-2306 are at the terminals as noted in the table
below. More details on these connections are contained in subsequent sections of this manual.
Input power is connected to terminals 11 and 12 as shown. A good quality linear or switching supply
with an output of +15 to 30 VDC and 150 mA is recommended for best (lowest noise) performance.
Consult the Accessories Data Sheet for recommended power supply options.
1
Voltage
2
4-20 mA Output High
3
Ground
4
Synchronization In
5
Voltage Output -
6
4-20 mA Output Low
7
Ground
8
Earth Ground
9
NC
10
Ground
11
Voltage Input +15 to 30 VDC
12
Ground
13
Ground
14
Ground
15
Synchronization Out
16
Ground
Ground
+V
in
KAMAN
SENSOR
COARSE
FINE
MAX
MID
MIN
1 2 3
5
4
6
7 8
9 10
11
13
12
14
15
16
