Kamada power KMD-PJ24100, User Manual

Page: 15 / 26

3.3.2 lnstallation steps
13
7
8
9
10
11
Wall Mount Bracket
Corresponding wall brackets are equipped according to different battery
specifications
Output negative power
cable According to different battery specifications and customer needs, match
the corresponding output negative power line
Output positive power
cable According to different battery specifications and customer needs, match
the corresponding output positive power line
Communication line
between inverter and
battery
According to different inverters and customer needs, the corresponding
communication network cable is equipped.
If the customer does not inform the inverter of the detailed information,
we will not provide this communication network cable.
Expansion screws Outer hexagon expansion screw GB/T5285-1985-M10X80-8.8
step 1 Assemble casters a.Lock the casters to the bottom of the battery with screws
step 2
Assembled battery back
lugs
b.Lock the wall hook to the back of the battery with screws
step 3 Assembling wall brackets c.Screw expansion screws to the load-bearing wall
step 4 Wall Mount Battery d.Hang the battery on the wall mount
step 5
Pair plugging positive and
negative power cables e.Insert the positive and negative power cord pairs
between the battery and the inverter
step 6
Docking inverter and
battery communication
cable
f.According to the communication protocol port of the
inverter, one end of the communication line between the
inverter and the battery is plugged into the CAN or RS485
port of the battery, and the other end is plugged into the
inverter.
step 7
Dial the ADD address
switch g.If
Assembly and
commissioning
step number
it is only one battery, please dial 1, and the rules of
other dialing addresses are detailed in 4.4
step 8 turn on the switch
h.Press the power switch on the side to let the ON/OFF
RUN 6 battery indicator lights display in green
Name Assembly Instructions