10.
Power input
(IEC). Insert the included power cable here to charge the unit. Note that the system can run off
the mains power while simultaneously charging the battery. The indicator illuminates when the battery is charging.
11.
Power switch.
Turns the unit ON or OFF.
12.
Link output.
This 1/4 inch jack can be connected to the system input of an amplifier or amplified loudspeaker
such as another system.
13.
Battery level indicator.
While the unit is powered ON, these four lights indicate the power remaining in the
battery. Battery life varies based on volume and usage.
14.
USB device charging socket.
Connect your USB device (smartphone, MP3 player, etc) to this USB socket to
charge it. This will only charge while the Zoomer 800 V2 power is ON. Please note that many tablets (iPad, etc
need a higher charge than smartphones and will therefore be slow to charge using this method. For improved
charging speeds, it is best to turn off a tablet before charging it this way. The fasted method for charging a tablet is
to use the mains charger supplied with the tablet.
Troubleshooting guide
Use this troubleshooting guide if the sound is distorted at high volumes.
Input is clipping
Try lowering the input gain or the volume control on your sound source or musical instrument.
Output is clipping
Lower the main volume level.
There is too much bass
Try adjusting the tone or EQ control on your sound source to lower bass level. This will allow you to play the music
louder before clipping (distortion) occurs.
Product specifications
Input voltage:
AC 100-120V / 60Hz / AC 220-240V / 50Hz
Frequency response:
70~20kHz +/-3dB
Bottom pole mount specifications
: Standard pole mount for speaker stands that are available at most
professional audio equipment retailers. Depth 97mm / Diameter 37mm
Battery life:
Up to 6 hours when battery is fully charged.
Dimensions
(WxDxH): 386 x 307 x 456mm
Weight
17.5 Kg
* NOTE: Battery life may vary based on temperature, age and volume usage of product