Important notes before using
Fully charge the battery before first use for maximum battery life. Make sure all input devices such as
microphones, CD players, USB players, MP3 players, and linked amplifiers are turned off and all volume settings
are set at zero.
Switch everything On in the following order.
1. Audio input sources (i.e. microphones, instruments, CD players, USB or SD players, MP3 players, etc).
2. Any amplifiers connected to the unit.
When turning the unit off always reverse this order.
Front and rear features
1.
Microphone balanced input
with volume/level control (combined 1/4 inch jack and XLR)
This input can either take a 1/4 inch jack or XLR balanced cable. An XLR cable is included with the microphone.
2.
Instrument/Microphone 2 input
with volume/level control (1/4 inch jack)
This mono input accepts a 1/4 jack input such as a microphone, guitar or other musical instrument.
3.
CD/AUX/MP3 input
with volume/level control (stereo RCA)
This knob controls the level of the input. This stereo RCA input can be used to connect a CD player, MP3 player or
other audio source. To connect to a portable device with a 1/8 inch headphone jack, you will need a standard (1/8
inch to RCA) adapter which is not included.
4.
Equalisation control
(EQ).This is a 3-band equaliser that allows you to adjust the frequency response of the
main bus signal.
5.
Master volume control.
This knob controls the master volume of the system.
6.
Media player.
3 audio source are available, USB, SD card and Bluetooth. The LCD display will change
depending on the corresponding audio input. Use the pin code "0000" to pair your Bluetooth device.
7.
Media player audio input switch
8.
USB input.
Connect USB flash drives or MP3 players via USB cables to this input.
9.
SD card input.
Insert SD card to this input.
USB DEVICE CHARGE
5V / 2.1A