3
2
1
4
5
6
7
9
8
10
11
12
Front panel
Rear panel
1.
Laser output – Laser output aperture
2.
Power – Red LED is ON
3.
Music – Synchronise to detected music signal
4.
IR – Infared signal received
5.
Switch – Power on and off
6.
Mains input with intergrated fuse holder
7.
DMX input - 3 PIN Male XLR
8.
DMX output – 3 PIN Female XLR
9.
Safety eye – Attach the safety cable
10.
LED function display
11.
Safety switch – turns unit off immediately
12.
Key switch
Basic operation
First connect the unit to the mains, to get an output from the unit you have to insert the safety key into the key switch and turn the
key clockwise.
The LED display will light up and your unit should default to star cluster mode. You have 5 show control options to choose from:
MODE
LED DISPLAY SHOWS
DESCRIPTION
REMOTE
rEN
REMOTE CONTROL MODE
Button A:
Off, Red, Off, Green, OFF, RED and Green.
Button B:
Sound or Auto on Currently Program.
Button C:
Program select: first one Random Programs of all
effects, then step and hold each one and each time you press
step to the next effect
SOUND
Sou
Sound activated mixed laser effect show
AUTO MODE
Aut
Mixed laser effect
A
uto show
*These show options are clearly shown on the LED Display, the above grid is an indication of what will be displayed on the LED
display when the unit is in the various show options.
The operation of the laser and navigation of the modes is via the four button controller situated on the rear display of the unit.
Basic operation of the unit is controlled via the built in function controller:
Navigation and access of the functions, modes and shows is initiated via the
function
button.
Whatever mode/function or show you are in, Press the
Func
Button once and the LED display
will start to flash.
You now use the
Func
Button
to navigate the unit. You can select from the following modes:
Remote-control mode (REM), Slave mode (SLA), Sound sensitivity mode (S 0-9), DMX mode
(001-512) and show control modes (Aut and Sou).
