Rear panel Control LED display
Addr
A001
A512
ShNd
sh 0
Sens
0
100
SoUn
on
ChNd
1Ch
12Ch
SL 1
6Ch
8Ch
SL 2
18Ch
off
tlt1
no
Yes
dISp
dSIP
led
on
off
tlt2
no
Yes
test
hour
0
uer
rSet
u10
9999
SLNd
NASt
sh16
sp 1
sp 9
Display
Function
Addr
Set the DMX address for the unit.
Use the Up and Down buttons to set.
ChNd
Set the DMX channel mode.
Choose from 1, 6, 8, 12 or 18 channels.
SLNd
Set the unit to Master/Slave mode.
Choose Master, Slave 1 or Slave 2.
ShNd
Set the unit to Show mode.
Set the pre-programmed show (from 01-16).
Sp1
–
sp 9
Sets the speed of the show.
Speed setting from 1-9.
SoUn
Set the unit to Sound-to-Light mode.
Choose either On or Off.
Sens
Set the microphone sensitivity.
Choose from 0(low) to 100(high) sensitivity.
Led
Set the Control LED display to turn off
automatically (OFF) or remain on (ON).
dISP
Rotate the Control LED display 180°.
Use when unit is mounted upside down.
tLt1
Set the first row Y axis position.
Set the first row Y axis reverse position.
tLt2
Set the second row Y axis position.
Set the second row Y axis reverse position.
test
Set the unit to run through a series
of auto self tests.
hour
Unit runtime.
uer
Software version.
rset
Resets the unit.
