INTRODUCTION
Thank you for purchasing the Kam Laser Tri260 SD Fscan.
To optimise the performance of this product, please read these operating instructions carefully to
familiarize yourself with the basic operations of this unit. The KAM Laser Tri260 SD Fscan laser has been
designed to create amazing laser effects. Please keep these user instructions in a safe place for future
reference. This unit has been tested at the factory before being shipped to you. There is no assembly
required.
WARNING
To prevent or reduce the risk of electrical shock or fire, do not expose this unit to high temperature, rain or
moisture.
Unintended reflections of the laser beam from reflective or metallic surfaces can be dangerous. Do not
touch the laser aperture. When cleaning the laser Aperture, please use a soft cloth.
Never remove warning or informative labels from the equipment. Do not connect this equipment to a
dimmer-pack.
Laser Class 3B product. National regulations must be adhered to at all steps of installation. These can be
downloaded from the website
www.kam.co.uk
(In Germany apply DIN 56912 and BGVR LASER note:
additional regulations may apply).
Always replace the fuse with exact same type because anything other than the specified fuse can cause a
fire, electric shock, damage your unit, and will void your manufactures warranty. This appliance must be
earthed.
This appliance should be used by qualified personnel only.
UNPACKING YOUR NEW KAM PRODUCT
Carefully inspect your laser, as you unpack it. If any damage is evident, please notify the supplier you
purchased the unit from immediately. For safety reasons do not use the unit if any damage has occurred
during transportation.
Contents:
SD260 tri-colour laser projector
1pc
Power cable
1pc
DMX signal cable
1pc
User manual
1pc
SD card
1pc
