REAR PANEL CONTROLS
[7] Balanced XLR audio inputs
- use these balanced XLR line level audio inputs to connect
any line level audio device such as a DJ Mixer, Mixing Console, CD player etc.
For more information on the advantages of using balanced audio connections visit
www.kam.co.uk/tuition.
[8] Unbalanced 1/4” Jack audio inputs
- use these unbalanced 1/4” Jack line level audio
inputs to connect any line level audio device such as a DJ Mixer, Mixing Console,
CD player etc.
[9] RCA Phono type audio inputs
- use these unbalanced RCA Phono type line level audio
inputs to connect any line level audio device such as a DJ Mixer, Mixing Console, CD
player etc.
[10] Channel 3 Input Select switch
- Channel 3 Input Select switch – when this switch is
in the ‘CH3’ position, amplifier channel 3 receives audio signals from the channel 3 audio
inputs. When the switch is in the ‘CH1+CH2’ stereo input position, channel 3 takes
audio signals from a inputs 1 & 2. The purpose of this is to enable use of channel 3
to drive a Sub Bass speaker when you only have stereo input from your mixer etc.
[11] Channel 1&2 speaker outputs
- use these Speakon Type connectors to attach your
Mid/High or Full range speakers. KX Pro Speakon terminals are wired in a +2/-2
configuration.
[12] Channel 3 speaker output
- use this single (red) Speakon type connector to attach
your Sub Bass Speaker.
POWER
PRO
CLIP
SIGNAL
POWER
PRO
CLIP
SIGNAL
2
POWER
PRO
CLIP
SIGNAL
3
7
8
9
10
11
12
13
14
15
16
17
4