2
3
KAM KXT23600 PROFESSIONAL POWER AMPLIFIER
KXT 236
0
0 P
O
WER
AMP
KXT 236
0
0 P
O
WER
AMP
NOTE Connecting multiple speakers to a single amplifier alters the impedance rating of the
speakers. For guidance on this visit www.kam.co.uk/tuition.
KXT amplifiers require speakers with a minimum Impedance rating of 4 Ohm.
They will work just as well with speakers rated at 8 Ohm but the volume achieved from
your speakers will be different for 4 and 8 Ohm speakers. The chart below tells you the
power output ratings for KXT amplifiers at 4 and 8 Ohms.
FRONT PANEL CONTROLS
[1] Mains Power switch
- use this to switch the mains power on/off.
[2] Power LED
- when the power is on the blue power LED will light.
[3] Volume controls
- used to adjust overall volume for each channel.
[4] Signal Indicator LEDs
- each channel has a single green Signal Indicator LED which
lights whenever a signal is present.
[5] Clip Indicator LED
- each channel has a single red Clip Indicator LED which only
illuminates when an excessive signal is present.
An optimum operating level is one where the Signal Indicator LED lights to show that the
amplifier is working and the Clip indicator LED lights very occasionally.
[6] Protect LED
- these amber LEDs illuminate when one of the following 'Protection'
mechanisms has engaged;
KXT 22350
KXT 23600
Stereo
2 x 300W RMS
2 x 450W RMS
Sub
500W RMS
900W RMS
4 Ohm speaker
8 Ohm speaker
2
4
5
6
Stereo
2 x 200W RMS
2 x 300W RMS
Sub
350W RMS
600W RMS
1
3
2