6.
Hold the bodypack ACT window (2) in front of the ACTIR window (2) facing the unit. Now press and hold the
Channel / Menu button (4) and the AT transmit icon
in the receiver will flash and then transmit
the receiver frequency onto the bodypack.
7.
Check that the frequency on the receiver and the bodypack match, and you’re ready to go.
The IR transmit must be carried out fairly quickly as there is a time limit for this function, if the transmitter
does not change then turn the transmitter off and start the process again.
When using IR make sure this is in line with the IR transmitter eye on the front of the receiver (2 - ACT). Ensure that
each unit has its own set frequency. Do not have two units set to the same frequency.
It is essential that the frequencies set are far enough apart as to not cross over or interfere with each other
The channel spacing should be at least 500 MHz apart.
Example:
CHA 863.00
CHB 863.50
CHA 863.00
CHB 863.10
Menu
Press Channel / Menu button (4) again until scan 1 is displayed.In this mode when the transmitter (microphone /
beltpack) is turned on the receiver will automatically scan for the frequencies of these and will set itself to match the
transmitters.
Press the Channel / Menu button (4) until scan O is displayed. This will deactivate the auto scan mode.
Press the Channel / Menu button (4) again until po.on is displayed. If both sides of the unit are set to po.on then as
soon as the power adaptor is plugged in the unit will automatically turn on, without the use of the power button.
Press the Channel / Menu button (4) again until po.of is displayed. If both sides of the unit are set to po.of when the
power adaptor is plugged in the unit will not turn on until the main power button is pressed.
Frequency options
Channel 70
Channel 38
Preset
Frequency
Preset
Frequency
1
863.00
1
606.00
2
863.40
2
606.50
3
863.80
3
607.00
4
864.20
4
607.50
5
864.60
5
608.00
6
863.20
6
608.50
7
863.60
7
609.00
8
864.00
8
609.50
9
864.40
9
610.00
10
864.80
10
610.50
11
863.10
11
611.00
12
863.30
12
611.50
13
863.50
13
612.00
14
863.70
14
612.50
15
864.90
15
613.00
16
865.00
16
613.50
It is possible to use more than one set of microphone / receivers. Using the chart above will help you select usable
frequencies. Remember to keep a good amountof spacing between channels to avoid interference or channel bleed.
If using more than one receiver setfor each channel keep them as far apart as possible.
