DMX address setting
When controlling the unit (or units) with a DMX controller, each one must be set with a specific DMX address. You can choose to
set all units with the same DMX address or you can set every unit with its own DMX address. If all units are set with the same
DMX address all units will be synchronised and operate in the same way. If you set each unit with a different DMX address, they
will receive the DMX signal from their own DMX address. You will now be able to control each unit individually. The DMX address
that you set for each unit must be determined by the number of channels. This unit has different options of DMX channel modes
(3, 6 or 15). When working in 3 DMX channel mode, you should set the starting address of the first unit to 1, the second unit must
be set to 4 (1+3), the third to 7 (4+3), the fourth to 10 (7+3) and so on. When working in 6 channel mode, you should set the
starting address of the first unit to 1, the second unit must be set to 7 (1+6), the third to 13 (7+6), the fourth to 19 (13+6) and so
on. When working in 15 channel mode, you should set the starting address of the first unit to 1, the second unit must be set to 16
(1+15), the third to 31 (16+15), the fourth to 46 (31+15) and so on.
Display
Mode
Function
AUT
AUTP
par can auto mode
AP01-AP13
auto shows
S01-S32
par can speed
AUTF
derby auto mode
AF01-AF07
auto shows
S01-S32
derby speed
N00-N09
motor speed setting
AUTN
unit auto mode
AN01-AN10
auto shows
S01-S32
lighting speed
N00-N09
motor speed setting
SOU
SOUP
par can sound mode
SP01-SP13
sound shows
SOUF
derby sound mode
SF01-SN10
sound shows
SOUN
unit sound mode
SN01-SN10
sound shows
COL
COLO
R 0-255
red adjust
G 0-255
green adjust
B 0-255
blue adjust
U 0-255
white adjust
S00-32
strobe adjust
N01-09
motor speed adjust
dNH
(DMX)
D001-D510
3CH
3 channel DMX mode
6CH
7 channel DMX mode
15CH
11 channel DMX mode
SLA
SLAU
Master/Slave mode
SYS
ASEN
SN01-SN04
mic sensitivity
