AC power
The unit is supplied with a power plug appropriate to its voltage. Should any other connections be required they must be carried
out with the following configuration:
Cable (EU)
Cable (US)
Pin
International
Brown
Black
Live
L
Light blue
White
Neutral
N
Yellow/green
Green
Earth
DMX-512 connection
If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the first
unit in a DMX chain. If you wish to connect a DMX controller with other XLR outputs you will need to use adapter cables.
1 = Shield
DMX output
2 = Signal (-)
DMX input
3 = Signal (+)
Connect the DMX output of the first unit in a DMX chain with the DMX input of the next unit in the chain. Always connect the the
output of one unit with the input of the next unit until all units are connected.
Unit features & functions
Number Feature
Function
1
Power supply input
Attach the IEC mains cable here. Built-in fuse.
2
DMX input
3 pin XLR connector for DMX512 input communication.
3
DMX output
3 pin XLR connector for DMX512 output communication.
4
LED display
LED function display and menu buttons to control the operating mode of the unit.
5
MENU buttons
MENU function buttons x 4 (see below for operation).
6
Mic
Built-in microphone for Sound-to-Light operation.
7
Par can mounts
Attach the par can lights to the controller bar at the 2 points shown.
8
Lighting unit connections
Attach all 4 lighting cables to the controller bar at the points shown.
9
Derby FX mounts
Attach the derby FX to the controller bar at the 2 points shown.
10
Light stand socket
Tighten screw to secure the controller bar to the light stand.
Function setting
Using the four function buttons on the controller bar you can set the operating mode of the unit. Press the
Menu
button to display
the different functions (see table below for a description of the functions). Use the
Up
or
Down
arrow buttons to make your
selection. When you have chosen your desired function, press the
Enter
button to confirm the change.
Auto modes: AP
(parcan effects) /
AF
(derby effects) /
AN
(parcan and derby effects)
Sound to Light modes: SP
(parcan effects) /
SF
(derby effects) /
SN
(parcan and derby effects)
