WARNING:
The heater must be properly installed before it is used.
This unit is equipped with one On/Off switch.
• Plug the Patio Heater into a grounded 220-240V 50Hz power outlet.
• Only operate the heater when it is in the upright position.
• Press on the On/Off switch to the “I” position to activate the heater.
Remote Control
Operation Instructions
A. To operate the heater on 2000W power, press
the button of the remote control.
B. To operate the LED light on, press the button
of the remote control
Touch switch
A. Touch the one time, turns the heater on
2000W power.
B. Touch the two times, turns the LED on.
C. Touch the three times, turns the heater on
2000W power and turns the LED on.
D. Touch the four times, turns the heater and
LED off.
To complete off the heater, press the On/Off
switch to the “O” position.
• Although the patio heater is shower proof, do
not use when raining or in wet conditions.
• Always disconnect the power cable from the
electrical supply, when the patio heater is not
in use.
