For Your Safety
36.
DON’T
operate any heater with a
damaged cord or after the heater
malfunctions, has been drooped
or damaged in any manner. Return
heater to authorized service facility for
examination, electrical or mechanical
adjustment, or repair.
37. This heater is not intended for use in
bathrooms, laundry areas and similar
indoor locations.
NEVER
locate heater
where it may fall into a bathtub or other
water container. To protect against
electrical hazards,
DO NOT
immerse in
water or other liquids.
38.
DO NOT
touch the control panel or plug
with a wet hand.
39.
DO NOT
run cord under carpeting.
DO
NOT
cover cord with throw rugs, runners
or similar coverings. Arrange cord away
from traffic area and where it will not be
tripped over.
40.
DO NOT
insert or allow foreign objects
to enter any ventilation or exhaust
opening as this may cause an electric
shock or fire, or damage the heater.
41. To prevent a possible fire,
DO NOT
block
the air intakes or exhaust in any manner.
DO NOT
use on soft surfaces, like a bed,
where openings may become blocked.
42. A heater has hot and arcing or sparking
parts inside.
DO NOT
use in areas
where gasoline, paint, explosive and/
or flammable liquids are used or stored.
Keep unit away from heated surfaces and
open flames.
43. Avoid the use of an extension cord
because the extension cord may
overheat and cause a risk of fire.
However, if you have to use an extension
cord, the cord shall be 2.5mm2 minimum
sizeo
44. To avoid fire or shock hazard, plug the
unit directly into a 220-240V and 13A
electrical socket outlet.
45. To disconnect heater, turn controls to
OFF, then remove plug from outlet.
Pull firmly on plug,
DO NOT
unplug by
pulling on the cord.
46. Always unplug the unit before moving or
cleaning, or whenever the heater is not
in use.
47. Use only for intended household use as
described in this manual. Any other use
not recommended by the manufacturer
may cause fire, electric shock, or injury
to persons. The use of attachments not
recommended or sold by unauthorized
dealers may cause hazards.
48. Always use on a dry, level surface. Use on
ceiling only.
49.
WARNING:
To reduce the risk of fire or
electric shock,
DO NOT
use this unit with
any solid-state speed control device.
50.
DO NOT
attempt to repair or adjust any
electrical or mechanical functions on this
unit. Doing so will void your warranty.
The inside of the unit contains no user
serviceable parts. Qualified personnel
should perform all servicing only.
