5
USK ICBM 30116/30155 - 090716
OPERATION
•
After having unpacked the appliance, clean water tank and ice
basket thoroughly.
Wait for 2 hours before taking the next step.
•
Pour drinkable water in the water tank. Do not try to fill more than
50 Oz. water or above the level of the ice basket.
•
To select the size of the ice cubes, press the SELECT button until
the corresponding pilot light turns on. “S”: small, or “L”: large.
•
Press START button to start the ice making process.
•
If the water tank is getting empty, the “ADD WATER” pilot light will
turn on and a long beep will sound. In that case,
the compressor
will stop automatically
. Remove the ice basket, refill the water
tank
. Wait for 3 mn
after the beep sound before pressing the
START button to resume the ice making process.
•
When the “ICE FULL” pilot light switches on, a beep will sound; it
means that you should empty the ice basket. In that case, the
compressor will stop automatically. Empty the ice basket
completely or partially.
Wait for 3 mn
after the beep sound
before
pressing the START button to resume the ice making process.
•
You can stop the ice making process at any time by pressing the
STOP button, to switch off the appliance.
•
Do not leave the ice maker non working for a long period of time,
as the water could get stale and improper for consumption. If you
do, please refer to the “Cleaning and Care” section of this user
manual.
NOTES:
If the ambient temperature is below 15°C/60°F, we advise you
to select the small size. If the ambient temperature is higher
than 29°C/85°F, we recommend you select the large size.
For best performance, the temperature of the water you pour
into the water tank should be between 7°C/45°F and
25°C/75°F and the ambient temperature between 15°C/60°F
and 37°F/100°F.
If you select the large size, the ice making process will be a
little bit longer.
You must press “START” button to restart the ice maker after
you add water or take out some of the ice after a warning
signal. If you do not, the compressor will automatically restart
