7
TKG SFC 1008
USE OF THE STEAM BROOM
•
The steam broom is not a vacuum cleaner, make sure the area to clean has been
swept before.
•
Use the measuring cup (L) to fill in the water tank.
You can remove water tank (D) to fill it directly from the tap.
Figure 5
Make sure that the tank is properly replaced.
Figure 6
WARNING :
Never fill the tank hot water.
If the water in your region is rich in limestone, we recommend using distilled water.
Refer to your water provider to get information about your tap water.
•
Fasten the micro fiber mop (H) on the broom.
•
Plug the appliance, the heating system starts automatically and the indicator light
turns on. The optimal heat is reached after 20 seconds.
The heating system produces some noise while starting up, this is totally normal.
•
Press the steam button (B) to start the steam production.
On first use, it can take a few minutes but after the first use the steam production will
start instantaneously.
•
Turn the steam flow adjustment wheel (J) to your preference.
•
Press the steam button (B) a second time to stop the steam production.
•
Unplug the broom to shut down the heating system (the indicator light turns off).
WARNING
: Do not leave the turned on broom stationary as the heat can leave a mark
on the floor.
CARE AND CLEANING
•
Unplug and wait for the steam broom to be completely cooled down before starting
to clean it or removing the accessories.
•
Roll up and fix the power cable on the dedicated hook.
•
Always empty the water tank after use.
•
You can wash the microfiber mop in the washing machine.
•
You can clean the housing with a damp cloth :
never immerse the broom in water !
Figure 6
Figure 5
